NTN Driveshaft CORP.

Angular Contact Ball Bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load.  in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

NSK BA289-1 angular contact ball bearings
Available
Round Type
65 mm x 100 mm x 18 mm NTN HSB013C angular contact ball bearings
Available
Round Type
30 mm x 47 mm x 9 mm NTN 5S-7906ADLLBG/GNP42 angular contact ball bearings
[Steel] Steel
1045 Carbon Steel
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Bearing Units
Cylindrical Roller Bearings
Deep Groove Ball Bearings
Needle Roller Bearings
Plain Bearings
Self Aligning Ball Bearings
Spherical Roller Bearings
Tapered Roller Bearings
Thrust Ball Bearings
Thrust Roller Bearings
Wheel Bearings
608rs Bearing
aisi 52100 Bearing
l68149 Bearing
lm16uu Bearing
Tapered Roller Bearings Tapered Single Metric