Thrust Ball Bearings
Thrust ball bearings are manufactured as single direction (fig. 1) or double direction (fig. 2) thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
In addition to the bearings presented in this section, SKF supplies thrust ball bearings for special application requirements. This assortment includes bearings with Solid Oil and NoWear coated bearings.
A ball thrust bearing is a particular type of rotary ball bearing. Like other ball bearings, they permit rotation between parts, but they are designed to support a high axial load while doing this (parallel to the shaft). Higher speed applications require oil lubrication. Generally, they are composed of two washers (raceways) which may be grooved the rolling balls elements which are typically caged. As opposed to roller thrust bearings, ball thrust bearings can generally operate at higher speeds but at lower loads.
- ISB 53224 U 224 thrust ball bearings
- Standard
- 5mm
- NACHI 51109 thrust ball bearings
- 4,968 inch
- 3.25 Inch | 82.55 Mi
- INA D12 thrust ball bearings
- 167 mm
- 720 mm
- ISO 53209U+U209 thrust ball bearings
- 1,8
- 55 mm
- 100 mm x 215 mm x 47 mm SKF NJ 320 ECJ thrust ball bearings
- 4,968 inch
- 3.25 Inch | 82.55 Mi
- SIGMA ESI 25 0755 thrust ball bearings
- 4,968 inch
- 3.25 Inch | 82.55 Mi
- 65 mm x 140 mm x 33 mm SKF NJ 313 ECP thrust ball bearings
- 4,968 inch
- 3.25 Inch | 82.55 Mi
- 50 mm x 90 mm x 20 mm SKF BSA 210 CG thrust ball bearings
- SKF
- BSA 210 CG